Klimatronic Transform Serie Manual De Instrucciones página 22

deactivates.
How is the m² or
m³ data of the
manufacturer
calculated
TRANSFORM unit
does not cool
correctly
E1
E2
E4
DF
SPARE PARTS AND ACCESSORIES SUPPLY (FAST CONVENIENT SUPPLY)
You can obtain spare parts and accessories for your TRANSFORM unit from your local dealer. And
at our website
you will find further information on individual accessory products as well as information on
obtaining our spare parts quickly and conveniently.
You will also find other information (e.g. FAQ, lists of spare parts, document download, etc) about
your TRANSFORM unit.
Name
EAN
Room temperature
outside the function
range:
Room temperature inside
the function range:
Temperature of the
cooling agent lines too
high or too low
Water tank full
De-icing mode
www.suntec-wellness.de
Description
TRANSFORM unit switches off automatically.
Check manual setting of the required temperature
as well as the TIMER setting.
The m² or m³ data of the manufacturer for the
various TRANSFORM units are average values
related to a room height of 2.5 metres. It must be
considered that such data can be clearly
underscored or exceeded under certain
circumstances. Circumstances which work against
efficiency of the TRANSFORM units include e.g.
bad insulation of the building, large window areas,
south facing, attic apartment, many additional heat
sources, such as e.g. number of persons, EDP,
light, kitchen units, washing units etc.
You achieve the most effective and economical
cooling comfort if you already cool the room to be
cooled when the room temperature is not yet
heated up. Air conditioners operate more
effectively if the temperature is to be maintained.
To drastically cool the air and inventory in a fully
heated room requires much more time and energy.
Observe all data in these operating instructions
concerning function range.
Temporary error of start temperature. Please
switch the TRANSFORM unit off and start it again
after approx. 30 minutes. If the error occurs
continuously, the TRANSFORM unit requires
specialist inspection.
Temporary error on measuring output temperature.
Please switch the TRANSFORM unit off and start
it again after approx. 30 minutes. If the error
occurs continuously, the TRANSFORM unit
requires specialist inspection.
If the water tank is full, the warning sign "E4"
appears in the display. To restart operation of the
TRANSFORM unit, please remove the plug of the
condensation water outlet to allow water to leak
out. Please use an appropriate collection tank.
When the water has been completely removed,
please start the TRANSPORT unit again. The
TRANSFORM unit can now be used as usual.
This procedure is completely normal and protects
the system from icing and failure. The unit starts
automatically after approx. 15 minutes again
(depending on the function setting). This
procedure repeats itself regularly.
Functional drawing
22