Klimatronic Transform Serie Manual De Instrucciones página 21

CLEANING AND MAINTENANCE
PLEASE REMOVE THE POWER PLUG FROM THE SOCKET BEFORE CLEANING THE TRANSFORM
UNIT.
COARSE FILTER
The air filters on the side of the TRANSFORM units can be simply removed by pulling the frame
sidewards. When cleaning, use a vacuum cleaner with brush or wash the filters under running, warm
water and dry them with a soft cloth!
Please clean the coarse filters regularly when in use.
ACTIVATED CARBON FILTER
The activated carbon filter can not be washed. Please replace if required. We refer to the part „Spare parts
and Accessories".
TROUBLE SHOOTING/ ERROR MESSAGES
The mobile local air conditioner TRANSFORM is equipped with a 3-minute compressor-delay
system which means the compressor needs 3 minutes to start.
This affects the switching on of the TRANSFORM unit (POWER) as well as switching over from one
function to the next, e.g. dehumidify to cooling or heating.
ERROR/ PROBLEM
Can I switch the
TRANSFORM unit
on immediately
after unpacking it?
When switching
on the
TRANSFORM unit I
sense a smell.
What should I do?
Can I operate the
TRANSFORM unit
WITHOUT the
extract air hose?
At which intervals
should the
activated carbon
filter of the
TRANSFORM unit
be replaced?
How can I increase
the efficiency of
the TRANSFORM
unit?
Compressor does
not activate
TRANSFORM unit
CAUSE
Production-related cause
or incorrect storage of
unit at e.g. dusty areas.
REMEDY
No.
The TRANSFORM unit must be placed upright for
at least 24 hours after every transport. Otherwise
the compressor may be damaged and there is no
capacity.
Odour development can arise on first use and after
a longer period of non-use by storing in unsuitable
areas (e.g. dusty areas).
Run the unit for ½ a day. The smell will disappear
after a while. In the case of intensive odour
development, air the room.
Yes, but only in dehumidification mode.
To achieve temperature adjustments, surplus heat
or coldness must be discharged.
To use the purpose of the filter fully, it should be
replaced every 6 months.
External circumstances exist which may impact the
efficiency of the TRANSFORM unit. Room
insulation, use of wall/window adapter, ratio of
window space (solar radiation), operation of
electrical units in the room (EDP), presence of
several persons in the room. You can increase the
efficiency of the TRANSFORM unit accordingly by
adjusting such circumstances.
Depending on ambient temperatures and
TRANSFORM unit type it may take approx. 10
minutes after starting the compressor until the
cooling/heating capacity is reached.
On reaching the set required temperature, the
21