Assembly; Operation - Craftsman 315.115800 Manual Del Operador

UNPACKING
This product requires assembly.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not
completely assembled or if any parts appear to be
missing or damaged. Use of a product that is not
properly and completely assembled could result in
serious personal injury.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
PACKING LIST
Hammer Drill with Auxiliary Handle Assembly
Bits
Operator's Manual
WARNING:
Do not allow familiarity with tools to
make you careless. Remember that a careless
fraction of a second is sufficient to inflict serious
injury.
WARNING:
Always wear eye protection with side
shields marked to comply with ANSI Z87.1. Failure to
do so could result in objects being thrown into your
eyes, resulting in possible serious injury.
WARNING:
Do not use any attachments or acces-
sories not recommended by the manufacturer of
this tool. The use of attachments or accessories not
recommended can result in serious personal injury.

ASSEMBLY

WARNING:
not operate this tool until the damaged or missing
parts are replaced. Use of this product with dam-
aged or missing parts could result in serious per-
sonal injury.
WARNING:
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
could cause serious personal injury, always remove
the battery pack from the tool when assembling
parts.
ASSEMBLING AUXILIARY HANDLE
See Figure 2, page i.
An auxiliary handle is packed with the drill for ease of
operation and to help prevent loss of control.
 Insert and push screw all the way through slot on drill.
 Attach plate and auxiliary handle to screw and tighten.
 Insert end of depth stop rod into depth stop rod slot on
the back of the plate.

OPERATION

APPLICATIONS
You may use this tool for the following purposes:
 Drilling in wood
 Drilling in ceramics, plastics, fiberglass, and laminates
 Drilling in metals
 Mixing paint
 Hammer drilling in concrete, brick, or other masonry
This product will accept Craftsman 19.2 V lithium-ion bat-
tery packs and Craftsman 19.2 V nickel-cadmium battery
packs.
For complete charging instructions, see the Operator's
Manuals for your battery pack and charger models.
8 – English
If any parts are damaged or missing do
Do not attempt to modify this tool
To prevent accidental starting that