AmazonBasics B07FDKF5ZY Manual Del Usuario página 8

EN
8
• Assemble the new inlet hose in reverse order.
NOTICE Lift the cover using a small slot
screwdriver.
Troubleshooting
The hose does not retract:
Possible cause: The hose has previously been
pulled out to the limit.
1. Open the upper lid.
2. Use one hand (on the outside of the product)
to help guide the hose.
3. Use your other hand to shortly turn the reel
(inside the product) quickly in the pull-out
direction. This action deactivates the brake.
4. Let the hose roll up.
5. Close the lid.
The hose does not roll up completely:
Possible cause: The spring is fatigued.