Intended Use; Before Use - Sonic 4800703 Manual Del Usuario

Intended use

Hydraulics bottle jacks are designed to lift, not support, rated capacity loads consisting of one end of a vehi-
cle. Immediately after lifting, the load must be supported by a pair of appropriately rated jack stands.
Warning: Never use hydraulic jack as a standalone the device. After lifting, immediately support the lifted
load with a pair of appropriately rated jack stands. Never place any portion of your body under the load while
lifting or lowering the load.

Before use

Inspect before each use
Do not use if broken, bent, cracked or damaged parts are noted. Any jack that appears damaged in any way,
or operates abnormally shall be removed from the device immediately. If the jack has been suspected to
have subjected to a shock load (a load dropped suddenly, unexpectedly upon it), immediately discontinue use
until jack has been checked by authorized service center.
1. Verify that the product and the application
are compatible. If in doubt, contact customer
support.
2. Before using this product, read the operator's
manual completely and familiarize yourself
thoroughly with the product, its components
and recognize the hazards associated with
its use.
3. Assemble handle, ensure spring clips align
with slots.
4. To familiarize yourself with basic operation,
use the notched end of provided handle to
engage and turn the release valve:
a. Clockwise until firm resistance is felt to
further turning. This is the "CLOSED"
release valve position used to raise the ram
plunger.
b. Counter-clockwise, but no more than 1 turn
from the closed position. This is the "OPEN"
release valve position used to lower the
ram plunger.
5. With ram fully retracted, locate and remove
the oil filler plug/screw. Insert the handle into
the handle sleeve, then pump 6 to 8 strokes.
Ensure the oil level is just below the oil filler
hole. Reinstall the oil filler plug/screw.
6. Check that the pump operates smoothly
and that the extension screw will thread
up/down easily before putting into service.
Replace damaged or missing parts with
factory authorized replacement parts only.
Only the handle assembly, oil filler plug, label,
and manual are available for this jack. Repair
of this product may require special skills and
knowledge and should only be attempted by a
factory authorized service center.
S O N I C - E Q U I P M E N T . C O M
|