Mopar K6864109AA Manual De Instrucciones página 5

3.0 COVER PLACEMENT
and FRONT CLAMPS
Prior to placing the cover,
3.1
remove both front clamp knobs (1).
3.2 Place the cover onto the truck
bulkhead and bed rails,
making sure to slide the cab
clamp threaded rods (2) through
the cab clamp brackets (3).
Align both sides.
3.3 Thread the cab clamp knobs
back onto the threaded rods.
Do Not use a wrench or
over-tighten.
Securely tighten both sides.
4.0 COVER LATCHING at the
REAR/TAILGATE END.
4.1 Close the tailgate and unfold the cover. Check that the
cover is parallel and square with the truck bed
and bed rails. If not parallel or square, open
the cover and loosen the cab clamps to
reposition the cover.
May 15, 2020
www.mopar.com
NOTE: When opening the cover,
be sure to stow the tail clamps
into the cover bow to prevent
damage to the tarp when folded.
1
2
3
5
K6864109AA