Inflating And Deflating The Boat - poolstar Z-RAY Manual De Instrucciones

INFLATING AND DEFLATING THE BOAT

Inflating
If the boat is inflated during cold weather or without direct sunlight on the
tubes, care must be taken not to over-inflate the tubes. As the air inside
the tubes heats up due to temperature rises or sunshine, the pressure will
increase. The boat is not fitted with a safety valve, so the pressure must be
monitored at all times.
- Select a clean area free of stones, gravel, sticks or other sharp objects.
- Carefully unfold the boat, spreading out the tubes and floor to make them
as smooth as possible. NOTE: For ease of install, it is preferable to set up
the boat on a warm and sunny day. If time permits, expose the unrolled boat
to direct sunlight for 1 hour or more, so that the boat material will be more
flexible during installation.
CAUTION: DO NOT DRAG THE BOAT, AS IT MAY TEAR THE BOAT OR
CAUSE OTHER DAMAGE.
Please insert the deflated floor board into the bottom of the boat
first.Then inflate the floor board.
7 www.zraysports.com ZBIII1-18-GB(V1) 21