Idiomas disponibles
Idiomas disponibles
WARNING - SAFETY RULES
GENERAL INSTRUCTIONS
Read and understand the following safety instructions before use.
Any modification or updates that are not specified in the instruction's manual should not be underta-
ken.
The manufacturer is not liable for any injury or damage due to non-compliance with the instructions featured in this manual.
In the event of problems or uncertainties, please consult a qualified person to handle the installation properly.
SET A BLIND RIVET (POP)
2
2
1
4.8
3.0
5.0
6.4
3.2
1
1
3/16"
1/4"
1/8"
4.8
3.0
5.0
6.4
3.2
3/16"
1/4"
1/8"
3 - Fully open the 2 handles
4 - Insert the rivet body into the assembly hole by pressing it fully against the metal surface. The rivet can be held even if the rivet
head is facing down
3
5 - Tighten the 2 handles
push the riveter to touch the rivet head, then press both handles again.
6 - Fully open the 2 handles to eject the rivet rod into the tank
Empty the tank when it is filled to 70% of its capacity.
To ensure proper operation of the manual riveter, always check that the rivet rod is ejected into the tank before setting
the next rivet.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported.
4
1 - Insert the body of the blind rivet into one of the 3 indentations to determine the
diameter of the hole in the assembly.
2 - Select the end cap corresponding to your rivet (see indication) and screw it into the
head of the riveter with the supplied wrench.
2
1
1
1
4.8
3.0
5.0
6.4
3.2
3/16"
1/4"
1/8"
3
3
, and insert the rivet rod into the tip of the pliers
1
.
until the rivet rod breaks. If more than one pressure is required, completely reopen both handles and
4
MANUAL RIVETER
3
.
5
5
5
5
4.8
3.0
5.0
6.4
3.2
3/16"
1/4"
1/8"
4.8
3.0
5.0
6.4
3.2
4.8
3.0
5.0
6.4
3.2
3/16"
1/4"
1/8"
4
4
3/16"
1/4"
1/8"
4
4
4
4
.
2
EN
