Tools And Materials; Before You Begin - BOCCHI FIRECLAY APRON Manual De Instrucciones

Tools and Materials

Safety
Glasses

Before You Begin

CAUTION: Risk of personal injury or product damage. Handle with care. Product can
break, chip, cause injury or product damage if handled carelessly. Get help lifting the sink.
Read these instructions carefully before you begin this installation.
Observe all local plumbing and building codes.
Shut off the hot and cold water supplies.
Inspect the drain and supply tubing. Replace if necessary.
Prior to installation, unpack the new sink and inspect it for damage. Return the sink to its protective carton until
you are ready to install it.
Due to the variety of installations possible with this sink, you may need to use other procedures than described.
It is very important that the proper materials are used with your sink. Proper selection of materials is critical for a
secure installation. Because of the variance in counter thickness, your carpenter and plumber must be aware of the
exact type of cabinets, countertops, and other materials you choose.
Ensure there is enough height in the cabinet to install the garbage disposal once since is in place.
After selecting the counter, provide a sample and details to each contractor involved in the project. It is very
important that the carpenter and plumber maintain communication and discuss the requirements of the project.
The cabinet and frame shown in these instructions are generic and may not represent the actual design or structure.
Due to the nature of undercounter installations, BOCCHI recommends that undercounter sink installations be
performed by trained and experienced installers.
To ensure a safe and damage-free installation, two people should install the sink.
All information in these instructions is based on the latest product information available at the time of publication.
BOCCHI reserves the right to make revisions in the design of products without notice, as specified in the
Price Book.
1. Preparation
Undercounter Installations
Ensure that there is room to install the faucet between the wall, or back of counter, and the edge of where the
sink the sink will be.
It is recommended to install the faucet to the countertop prior to installing the sink. Follow the faucet
manufacturer's instructions to install the faucet to the counter.
2
Tape
Measure
Drill
Sealant
Plus:
• 1/2" or larger drill bit
Pencil
• Hole saw 1-3/8"
• Support frame members
• Sanding block
• Assorted sandpaper
• Orbital sander (optional)
WWW.BOCCHIUSA.COM