Installation Instructions; Technical Details - Hoover DOMINO HVE32 Manual De Uso Y Mantenimiento

INSTALLATION INSTRUCTIONS

TECHNICAL DETAILS

MODELS
Voltage
Current
Hi-light plate 1700/700 W
Hi-light plate 1200W
Hi-light plate 2400/1500W
Max power W
HVE32
1. Installation
Installation is the buyer's responsibility. The manufacturer accepts no liability for this service. Any action that the manufacturer has
to take due to an erroneous installation will not be covered by the guarantee.
The flush-mounted cook tops are designed for installation in work tops made of all kinds of material, providing they can withstand a
temperature of 100°C, and are between 25 and 40 mm thick. If the cook top is installed in a position so that the side of a kitchen
unit comes up against its left-hand or right-hand side, the distance between the vertical panel and the edge of the cook top must
always be at least 150 mm. The distance between the back wall and the edge of the cook top must be at least 55 mm. There must
be a distance of at least 70cm between the cook top and a hood. A partition made of insulating material (wood or the like) must be
inserted between the cook top and the space below. This partition must be at least 10 mm from the underside of the cook top tray.
X = minimum 150 mm
Z = 10 mm
Y = partition
Fixing the cook top to the unit
The cook top is fixed to the unit by means of the brackets and accessories provided. Holes are provided in the bottom of the tray
where the tabs (A) are inserted so that you can attach the screws (C) that hold the brackets (B) in place.
A = tab for inserting in the bottom of the
cook top tray
B = fixing bracket
C = screw
HVE32
230V
16A
1
1
2900
18
HVE31
230V
16A
1
2400
HVE31