Kohler 3600A Serie Guia De Instalacion página 7

#8-32 x 3/4"
Panhead Screw
7. Install the Bottom Bracket
Position the bracket at the bottom end of the "L" jamb.
Align the holes in the bracket with the holes in the "L" jamb.
Using pliers, hold the square nut on the back of the "L" jamb and tighten one of the provided #8-32
x 3/4" panhead screws.
Repeat with the second screw.
8. Install the "L" Jamb
On the "L" jamb side of the door, insert a pivot pin through the hole in the bottom bracket with the
head of the pin toward the bottom track.
Place the washer down over the head of the pin.
While holding the pin in place, install the "L" jamb onto the bottom track.
Align the holes in the "L" jamb with the holes in the wall.
Through the four middle holes, secure the "L" jamb to the wall with the provided #8-18 x 2"
panhead screws.
Place a bracket at the top of the "L" jamb and align the holes in the bracket with the holes in the "L"
jamb.
Secure the bracket with the provided #8-18 x 2" panhead screw.
Add caulk to the top bracket plug.
Insert the plug into the top bracket.
Sterling
"L" Jamb
#8-32
Square Nut
Bottom Bracket
#8-18 x 2"
Panhead Screw
Washer
Pivot Pin
7
Top Bracket
Plug
"L" Jamb
#8-18 x 2"
Panhead Screw
Bottom
Bracket
Inside of
Shower
1034022-2-B