Dexter 3.6VSD2.5 Instrucciones Legales Y De Seguridad página 76

FR
c) Do not expose power tools to rain or wet conditions.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil,
ES
sharp edges or moving parts.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use.
PT
the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply.
IT
reduces the risk of electric shock.
EL 3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you
are tired or under the in uence of drugs, alcohol or medication.
PL
serious personal injury.
b) Use personal protective equipment. Always wear eye protection.
UA
hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the o -position before connecting to power source and/or battery pack,
RO
picking up or carrying the tool.
EN
Carrying power tools with your nger on the switch or energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on.
tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts.
jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly
Use of dust collection can reduce dust-related hazards.
used.
h) Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A
careless action can cause severe injury within a fraction of a second.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application.
the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and o .
dangerous and must be repaired.
c) Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making
any adjustments, changing accessories, or storing power tools.
accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions
to operate the power tool.
e) Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other
condition that may a ect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are
caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working
conditions and the work to be performed.
situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
5) Battery tool use and care
a) Recharge only with the charger speci
e when used with another battery pack.
b) Use power tools only with speci cally designated battery packs.
c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small
metal objects, that can make a connection from one terminal to another.
e.
Damaged or entangled cords increase the risk of electric shock.
Power tools are dangerous in the hands of untrained users.
Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to
Use of the power tool for operations di erent from those intended could result in a hazardous
by the manufacturer.
Water entering a power tool will increase the risk of electric shock.
A moment of inattention while operating power tools may result in
Protective equipment such as a dust mask, non-skid safety shoes,
A wrench or a key left attached to a rotating part of the power
This enables better control of the power tool in unexpected situations.
The correct power tool will do the job better and safer at
Any power tool that cannot be controlled with the switch is
Such preventive safety measures reduce the risk of starting the power tool
A charger that is suitable for one type of battery pack may create a risk of
Use of any other battery packs may create a risk of injury and e.
Shorting the battery terminals together may cause burns or a
Use of a cord suitable for outdoor use reduces
Use of an RCD
Loose clothes,