Troubleshooting; Warranty Statement - PROZIS FAB Manual Del Usuario

INSTRUCTIONS FOR USE
1. Charge the device before using it for
the first time:
• Connect the USB cable to any USB
power source. A red light will switch
on.
• Once the device is fully charged, the
red light will switch off. Disconnect
the unit from the USB port. The fabric
shaver is now ready for use.
2. Place the garment on a flat and clean surface.
3. Press the power button to switch on the device
4. Test the device over the back or edges of the garment before first use.
5. Use the device following the fabric's fiber texture, performing slow, circular and repeated
movements. Do not press the device onto the garment too hard. Do not use it over em-
broideries, zippers, buttons, and loose threads.

TROUBLESHOOTING

Some issues that arise may be solved by the user. If the problem persists after having tried
the following solutions, please contact Prozis customer service.
TECHNICAL PROBLEM
The fabric shaver does not
work.
The device's rotation speed is
slowing down.

Warranty statement

All electrical and electronic items commercialized by Prozis, via www.prozis.com, are covered
by the warranty applicable to the purchase and sale of consumer goods.
GENERAL CONSIDERATIONS
This document contains the terms and conditions of Prozis' warranty for final consumers.
The warranty is valid exclusively for the consumer who purchase the product for non-profes-
sional purposes.
WARRANTY PERIOD
Prozis guarantees that the product is to remain free from material and production defects for
a 2-year period, counting from the date of initial purchase by a consumer and the respective
delivery, or for longer if legally established by the applicable national law.In the event that
CAUSE
Battery is low
You are applying too much
pressure.
Figure B
SOLUTION
Use the USB cable provided to fully charge the appliance.
Do not apply excessive pressure onto the cutting blade while
using it.
ON
OFF
EN
6