Parts And Maintenance - Ingersoll Rand 3103XPA Especificaciones Del Producto

● Backing Pads should be inspected for signs of irregularities such as fractures, excessive
wear, nicks, cuts, at the edges of center hole. Pads showing such characteristics should
not be used.
See drawing 16591752 on page no. 2.
A
Sanding Disk
B Backing Pad
C Hold Wrench Tool here
For Sanding Disk Installation:
1. Use wrench to hold spindle in place.
2. Thread backing pad onto spindle.
3. Thread sanding disk onto the backing pad.

Parts and Maintenance

When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
Original instructions are in English. Other languages are a translation of the original instructions.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
47520876001_ed3
EN
EN-2