Technical Specifications - Joycare JC-503 Manual De Instrucciones

ecologically dispose of all its components.
The mains adaptor cord should be detached from the hair/beard clipper before disposal.
1) Loosen all three screws located on the back of the device with a small Phillips screwdriver.
2) Open the device by separating the two halves of the body.
3) Undo the four fixing screws holding the circuit board with a small Phillips screw driver.
4) Cut all the wires with pliers. - Remove the battery from the circuit board and dispose of it in a
suitable collection point.
SYMBOLS
Do not use this appliance in the vicinity of bathtubs, showers, basins or other water-
bearing containers.
This appliance complies with all applicable European Directives.
Class II adaptor

TECHNICAL SPECIFICATIONS

Mains and rechargeable operation
Up to 30 min wireless operation
Charge indicator
Hair shaper mode
2 trimming guide combs
10 cut level options
Maintenance and cleaning set
Hair set
2x1.2V , 600mAh Ni-Mh Batteries
Output: 3 V 1.000 mA
Supply: 230-240V~ 50 Hz
DISPOSAL
The device (including its removable parts and accessories) must not be disposed of
together with municipal waste at the end of its life, but in compliance with European
Directive 2002/96/EC. Since it must be handled separately from household waste, either
carry it to a separately-collected waste disposal centre for electrical and electronic
appliances or give it back to the retailer on purchasing a new device with the same purpose. Any
infringement will be severely prosecuted.
The batteries used in this device must be disposed of in the special bins at the end of their life.
6