Never leave the appliance "ON" without supervision.
15
Open the knob on the water reservoir by aligning the oval
1
marking (0) on the knob with the marking
through a quarter turn clockwise.
Fill the water reservoir with the required level of cold water as
2
specified in the recipe guidelines (section 2.4). Do not fill the
reservoir above maximum capacity and don not fill the bowl
above maximum capacity.
The bowl features a measuring scale for accurate dosage.
Note
Close the water reservoir by re-applying the knob and turning it
3
such that the oval marking (0) on the knob is aligned with the
marking
on the device.
If the device is assembled: remove the lid with a quarter turn clockwise and lift
4
it up (Figure 4). Now remove the bowl from the base unit with a quarter turn
clockwise and take out the baskets, if applicable.
Cut the ingredients into small pieces. Guidelines can be found in
5
section 2.4.
If you wish to steam two separate ingredients without mixing
them:
Place the half-basket into the basket such that the former is
secured in the internal grooves of the latter.
Then add the ingredients to the baskets.
Place the basket and half-basket, if applicable, into the bowl.
6
Apply the lid to the bowl and turn it anti-clockwise until it locks
7
into place.
Place the bowl on the base unit and secure it with a quarter turn
8
anti-clockwise.
Connect the device to the power supply.
9
10
Press the device on/off button
cooking indicator illuminates. The steam cooking starts.
on the device
once. The integrated steam
35
Figure 1
Figure 3
Figure 2
Figure 5
Figure 6
Figure 7
Figure 9