Ensure A Proper Spray Pattern; To Insert And Remove The Battery; Battery Life; Modes Of Operation - Petsafe RFA-18 Guía De Uso

Ensure a Proper Spray Pattern

For the PetSafe ® Spray Bark Control Collar to perform properly, the nozzle must be positioned
correctly and there must be a clear path from the Spray Nozzle to your dog's snout. Follow these steps:
1. Make sure the PetSafe logo on the front of the unit is
upright and the Spray Nozzle is angled out and pointing
up towards the dog's snout.
2. For long-haired dogs, it may be necessary to trim the neck
hairs along the path of the spray. It is important that the
spray reaches the dog's snout to be effective.
_______________________________________________________________________________________

To Insert and Remove the Battery

Note: Do not install the battery while the Bark Control Collar is on your dog.
A replacement PetSafe battery
(RFA-18) can be found at
many retailers. Visit our website
at www.petsafe.net to locate
a retailer near you and for
a listing of Customer Care
Centre telephone numbers in
your area.

Battery Life

Average battery life is 2 to 4
months, depending on how
often your dog barks. However,
due to greater use during
your dog's training, your fi rst
battery may not last as long as
replacement batteries.
_______________________________________________________________________________________

Modes of Operation

• To activate the unit, press the On/Off Button until the Green LED Light
comes on and release. The Green LED Light will fl ash once every 5
seconds.
• To turn the unit off, press the On/Off Button and hold until the Red LED
Light fl ashes.
Note: The Yellow LED Light will fl ash briefl y before the Red LED Light appears.
This indicates the reset sequence.
6 www.petsafe.net