Important - Alessi SG76 Manual Del Usuario

How to insert the batteries
• Remove the container (fig. 5).
fig. 5
• Open the battery
compartment (fig. 6).
fig. 6
• Insert the 2 AALR6
batteries (included) into the
compartment as shown on
the battery compartment
cover (fig. 7). Close the
compartment and replace the
container.
fig. 7
How to use the Fluff Remover
• Place the sweater on a flat,
stable surface. Check that
the fabric is perfectly taut.
• Turn the blade head ring to
the left to set it to the best
position for the type of fabric
(fig. 8).
fig. 8
• Push the on/off button (fig. 9).
fig. 9
• Move the Fluff Remover on
the fabric in a slow, circular
motion, without exerting too
much pressure (fig. 10).
fig. 10
10
• Push the on/off button
again to switch off the Fluff
Remover.
• The container has a window
so you can check the
contents.
Empty the container when it
is half full.
• Place the protective cover
on the blade head when not
using the Fluff Remover.
How to care for
your Fluff Remover
How to empty the container
• Switch off the Fluff Remover
and remove the container.
• Remove all lint and fluff
from the container and
passage channel (fig. 11).
fig. 11

IMPORTANT!

The Fluff Remover has an
auto-stop safety device that
prevents the blades from
running when the head
is removed. Even so, you
should ALWAYS remove
the batteries before any
maintenance operation.
• Replace the container.
How to clean the blades
• Turn the adjustment ring
completely to the left to
remove the head (fig. 12).
fig. 12
• VERY CAREFULLY remove
the blades (fig. 13) and clean
them with the brush.
fig. 13
11