Error Report - Kroeplin C0 Serie Manual De Usario

ERR06 Tolerance limit is out of the acceptable range
OFFSET is out of the acceptable range
ERR07
The instrument must be returned to the service centre for checking
Reference point in „Relative-Mode" is out of the indicating range
ERR08
ERR09 no communication with computer or peripheral devices
ERR10 interruption of communication during data transfer
ERR11 Pairing information get lost, remove the connected devices and restart pairing!
ERR12 Bluetooth connection has failed after 30 sec., restart pairing!
Safety information
- Before starting please read this manual carefully and follow the safety information.
- The charging station, charging cable or power supply must not be used if damaged. Please contact in this
case the seller/dealer.
- Protect charging station against high temperature and humidity.
- People with a cardiac pacemaker should consult their physician before using the charging station.
- Do not open the charging station.
- Do not place anything between charging station and the gauge to be loaded.
- Do not place magnetic cards or magnetic storage media near the charging station.
Scope of supply (look at page 7)
• Charging station E05 (B), • Charging cable USB-A to Micro-B (C), • USB power supply incl. plug set (C)
Preparing to use the charging station
1. Connect the Micro-B plug of the charging cable (B) to the charging station (A).
2. Connect the USB-A plug of the charging cable (B) to the supplied USB power supply (C) or to the USB
port of a PC/laptop* (D).
3. If properly connected, the LED of the charging station is green.
4. Place the gauge* correctly into the recess of the charging station (A).
5. The charging process is acoustically confirmed and the LED changes to blue.
6. After complete charging the charging process stops automatically and the LED of the charging station (A)
changes to green.
*Not included in delivery.
Caution:
If there is an acoustic signal from the charging station in short intervals and the LED changes permanently
between green and blue the gauge is placed incorrectly or the power supply of the charging station (via
USB hub) is inadequate.

Error report

Inductive Charging Station
19