Sleep Mode; The Remote Control - PNI PTV35 Manual De Usuario

that you turn off the robot from the on/off (I/O) button if you do not use
it for a long time.

Sleep mode

When the robot is in Sleep mode, the LED on the CLEAN button is off.
• If the robot is not used for 60 seconds, it will enter Sleep mode.
• If you briefly press twice the key
enter Sleep mode.
When you want to clean the floor, make sure the robot is not in Sleep mode.
To awake the robot from Sleep mode, press the CLEAN button on the robot
or the key on the remote control.

The remote control

Power the remote control with 2 AAA batteries (not included).
Move the on/off (I/O) button on the robot to the on (I) position.
1. Press the key
mode. Press again the key , the robot will return to Sleep mode.
2. Press the key . The robot will head to the loading base. The LED on the
CLEAN button flashes.
3. Press the key
4. Press the keys
5. The key is only used to add the robot to the Tuya Smart application.
Read the chapter Add device in Tuya Smart application for more details.
6. Press the key
7. Press the key
1 meter. This method of cleaning is recommended for small rooms.
8. Press the key
method of cleaning is recommended for rooms with a lot of dust and dirt.
9. Press the key
10. Press the key
User manual
(on/off). The robot will exit Sleep mode and enter Standby
. The robot begins to move and vacuum.
, , to move the robot in all three directions.
to increase the suction power.
. The robot will perform zigzag movements with a radius of
. The robot will perform small Z-shaped movements. This
. The robot will clean along the edges of the room.
to enable/disable voice alerts.
on the remote control, the robot will
8