Stihl Laser 2-in-1 Instrucciones De Servicio página 17

Felling
Determine the direction of fall and make the felling notch as
:
described in the chainsaw's instruction manual.
STIHL recommends the following method:
Felling Notch
1
2
Before switching on, turn the rotary knob (2) with laser diode so that
:
there is no risk of being dazzled by the beam.
Press the switch (1) - laser diode is on.
:
Turn the rotary knob (2) to line up the beam in your field of vision
:
(1 m to 2 m).
Position your saw so that the laser beam points in exactly the
:
direction you want the tree to fall.
Use the gunning sight on the saw's shroud and fan housing to check
:
the direction of fall again - the laser beam and gunning sight must be
parallel to each other. Both gunning aids must be at right angles to
the felling notch.
Press the switch (1) to turn off the laser beam. :
Remove the Laser 2-in-1 from the holder.
:
The procedure is now as described in the instruction manual of the
:
saw you are using.
G
17