Bestron DLD9070 Manual Del Usuario página 22

Ocultar thumbs Ver también para DLD9070:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
operAtion - general
The appliance is intended only for domestic use, not
for professional use.
1. Knob to select upper and/or
lower heating
2. Infinitely adjustable
temperature knob
3. Pilot light
4. Lid
5. Viewing window
6. Handle
7. Pizza stone
8. Aluminium spatulas
9. Cable and plug
operAtion - before first use
Place the pizza stone (7) in the oven. Turn the select knob (1) to upper and lower heating, turn the temperature
knob (2) to "MIN" and heat the oven ca 10 - 15 minutes. After that switch the oven off (turn the temperature
knob (2) to "OFF" and the select knob (1) to "OFF"), open the pizza oven and leave it to cool for ca 10
minutes. After this you can start preparing a tasty crispy pizza. If you don't preheat the pizza stone without
pizza before first use, there is a change that the stone will crack.
operAtion - use of pizza oven
1. Open the lid of the oven (4) using the handle
(6).
2. Place the pizza stone (7) in the correct position
in the oven (so that the hinged clips cannot be
folded into the oven). Close the oven.
3. Switch the temperature knob (2) to 'MAX' and
the selection knob to upper and lower heating.
After approx. 10 minutes the appliance is ready
to use.
The pilot light stays on until the automatic
thermostat switches off.
4. Open the oven. Use the 2 spatulas to pick up
the pizza and put it on the oven stone. After that,
pull out the spatulas and close the oven.
5. Leave the temperature knob set to 'MAX' and
the selection knob set to upper and lower
heating.
Bake fresh made pizzas approx. 5 to 7 minutes.
Bake frozen pizzas approx. 8-10 minutes.
(Check the baking process every now and then by opening the lid)
Depending on the used topping, the given baking time can differ.
6. When ready, use the 2 spatulas to take out the pizza and put it on a plate.
When the pizza topping is already done, but you prefer a more crispy pizza bottom, just switch off the upper
heating with the selection knob (1) and bake the pizza a little bit longer with only the lower heating on.
1
5
3
4
6
A
22
instruction manual
2
9
7
8
Figure 1
B
Figure 2
A. Top heating element
B. Bottom heating element
Tabla de contenido
loading

Tabla de contenido