Troubleshooting - Kobalt SGY-AIR176 Manual Del Usuario

CARE AND MAINTENANCE
RE-ASSEMBLING SPRAY GUN
5. Slide Needle Spring over the Paint Needle.
(See Figure 7)
6. Screw on the Fluid Adjustment Knob (D)
clockwise.
Storage
1. When not using the spray gun, turn the fluid adjustment knob counterclockwise (to
open) which will reduce the spring tension on the needle fluid tip.
2. Store spray gun in a dry and safe place out of reach of children.

TROUBLESHOOTING

If you have any questions regarding sprayer performance, please call our Customer
Service Department at 1-888-3KOBALT, 8:00 a.m. – 8:00 p.m., EST, Monday–Friday.
SPRAY PATTERN/PROBLEM
Improper spray pattern
Improper spray pattern
POSSIBLE REASON
1) One side of air cap
is clogged.
2) Dirt on one side of
fluid nozzle.
1) Loose air cap/dirty
seal.
2) One side of air cap
is clogged.
3) Dried material on
one side of fluid
nozzle.
19
7
8
Clockwise
SOLUTION
Remove air cap and soak in
solvent, then blow air through
until clean. Wipe off nozzle
tip using a rag moistened
with thinner. To clean holes,
use a broom straw or
toothpick. Never try to detach
dried material with a sharp
tool.
1) Tighten air cap.
2) Remove air cap and soak
in solvent, then blow air
through until clean. Wipe
off fluid nozzle using a rag
moistened with thinner. To
clean holes, use a broom
straw or toothpick. Never
try to detach dried material
with a sharp tool.
D