Remote Control; Features; Getting Start - Oregon Scientific i.relax Zen Manual Del Usuario

4.
4. DC: Socket for connecting to AC / DC power
adaptor.
5. Audio Line in Jack

REMOTE CONTROL

1.
2.
3.
1. POWER button: Turn on / off the unit.
2. SLEEP TIMER button: Set diffuser timer
(120mins / 60 mins / OFF)
3. VOLUME button: Set speaker volume (low /
medium / high)
4. DIFFUSE button: Turn on / off the diffuse function
5.
LIGHT button: Press to choose light setting:
Red / Orange / Yellow / Green / Blue / Purple / Loop / OFF
6. TUNE button: Press to toggle one of the 5
background tunes

FEATURES

1. Unltrasonic Diffusing Technology
2. Soothing Sounds and Music line-in
3. Colour light effect
4. Material: Natural wood
5. Ultrasonic technology with special mist
dispersion effect
6. Light effect in 6 colors (Red, Orange, Yellow,
Blue, Green, Purple)
7. Choice of 2 natural sounds and 3 musical
pieces
8. Audio music line-in
9. Remote control
10. Sleep timer function
11.
Low water level indicator
12. Power: AC / DC adaptor (included)
GETTING STARTED
Connecting to power mains
1. Remove the battery protector before first use.
2. Remove the Glass Cover and the Plastic
Cover from the unit.
5.
Water tank
3. Plug the power adaptor to the DC Jack.
4. Place the unit on a stable and even surface.
5. Pour maximum 75ml of room temperature tap
water into the water tank.
6. Add few drops of essential oil into the water
4.
tank as illustrated.
7. Put the Plastic Cover and Glass cover back
to the unit.
5.
6.
8. Connect the power adaptor the mains power
supply.
9. Press the POWER
control to turn on the unit.
NOTE
Do not use distilled water.
•
• Do not use water over 40 °C.
Use water soluble essential oil only.
•
Switch off and unplug the unit from the mains
•
before moving or cleaning the unit.
Do not overfill the water tank. The timber body
•
of the unit will crack if absorbed too much
moisture. Always keep the timber body dry.
Do not turn the unit upside down when the
•
water tank is filled and /or the Glass Cover and
/ or the Plastic Cover have not been removed
from the unit.
To pour away the remnant from the water tank
1. Press the POWER
control to turn off the unit and unplug from the
mains.
2. Remove the Glass Cover and Plastic cover
from the unit.
3. Pour the remnant away as illustrated.
2
Plastic Cover Glass Cover
button on the remote
button at the remote