Preparation - Kobalt SGY-AIR70TZ Manual De Instrucciones

SPRAY GUN SET-UP
Change of Feed Method
This latex spray gun is capable of pressure or
siphon feed. The feed method can be easily
changed by fully turning the side knob. You should
be sure to choose the proper feed method first.
(See Figure 1)
Non-Bleeder to Bleeder Conversion
(See Figure 2)
1. Remove spray gun from air supply.
2. Remove fluid control knob and the fluid needle
spring.
3. After removing air valve spring store it in a safe
place so it can be attached when necessary to
convert back to a non-bleeder spray type.
4. Insert fluid needle spring and replace fluid
control knob.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list. If any part is missing or damaged,do not attempt to
assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time:5-10 minutes
Tools Required for Assembly (not included): Adjustable wrench
1
P: Pressure feed
S: Siphon feed
2
Pattern Control
Knob
7
Fluid
Control
Knob
Fluid Needle
Spring
Air Valve Spring