Accessories And Information; Problems And Solutions - Leifheit Air Active L Professional Manual Del Usuario

Accessories and information

The following additional accessories can also be ordered:
Special ironing board cover
Article number: 76085/86
126 x 55 cm
Cable holder
Article number: 76023
Special care iron sole
Article number: 76123

Problems and solutions

Water droplets will escape from the steam
iron when there is long interval between
ironing.
In the event of longer breaks from ironing, the steam
may condense in the feed cable to the steam iron. As
a result, several drops of water may escape when you
start ironing again.
Recommendation: Do not start ironing your laundry
immediately.
Creases may develop despite steam ironing.
When ironing with steam work in one direction and
back without steam to "fix" the material. When
ironing laundry with traces of starch (after washing)
in the fabric, you can obtain good results by making it
damper, i.e. adding more steam before "fixing".
The steam iron is only producing hot water.
The steam iron is too full. Evaporate the excessive
hot water and empty the steam station (see notes on
ironing, page 19). The complete system does not need
to be turned off to do this. Then fill the steam station
with a maximum of 800 - 900 ml of water and turn
it back on.
22
The ironing pressure and the collection of dust parti-
cles and dust reduces the permeability of the special
ironing board cover and therefore the performance of
the complete pressurised steam ironing system.
The special ironing board cover [4] is particularly
permeable to air and steam.
Therefore, only use original accessories.
The handle is hot.
It is normal for the handle of the steam iron to
become warm during use. However, if the handle is
so hot that it is no longer possible to hold it, turn off
the complete system and inform Leifheit customer
services.
Quick ironing start-up
(short-term heating time for pressurised steam).
Fill the water container with hot water (approx. 800 -
900 ml). After a short time, you can iron with steam.
The steam iron is not heating up.
Check whether the plug is inserted into the socket and
at the device is turned on. Set the temperature control
of the steam iron to zone . If the problem has
not been solved, please inform our Leifheit customer
services..
Falling pressure
Each time you start the complete system there will
be a large volume of steam when initially pressing
the steam button, which will then reduce during the
ironing session. This is a normal process and does not
affect the functioning of the complete system.
If you order additional accessories or would like to know
more about Leifheit's complete pressurised steam iro-
ning systems, please contact your local Leifheit retailer
or find out more at:
Leifheit AG
E-Mail: [email protected]
www.leifheit.de
Water is escaping.
When the system cools down condensation water coll-
ects in the extraction container. Ensure that steam is
being constantly extracted during ironing. Remove the
special ironing cover from the ironing board to dry.
An excessive production of steam will also result in an
increased development of moisture. Please read the
ironing instructions on page 19: Iron in one direction
with steam and in the other direction with no steam!
The system will not stop producing steam.
The steam button on the steam iron is stuck. Push
the button several times quickly. If the problem has
not been solved, please inform our Leifheit customer
services.
The steam iron is no longer producing steam.
Check whether all switches are turned on. Check that
the steam station is filled with water. If the problem
has not been solved, please inform our Leifheit
customer services.