Stanley FAT MAX FMHT1-77360 Manual De Usuario página 5

Within 5 seconds, press the power button momentarily to pick your desired setting.
Accuracy Coarse
After you have made the change, wait 5 seconds. You will automatically exit menu mode and your setting will be
saved. Re-enter menu mode to make other changes to settings.
Note: Change the channel setting on the remote display first. Then change it on the receiver.
Using the Remote display
Plug the unit into a 12-24v automobile power outlet.
ON- Press the Power button momentarily to turn on the unit. The LEDs
will blink in unison with the Receiver LEDs if the receiver is on. If the
receiver is off or not communicating with the display, the center and
plumb LEDs will remain lit.
OFF- Press and hold the Power button >3 seconds to turn off the unit.
MENU- To access the settings menu, the receiver must be on and the
remote display off.
Press and hold the Power button until the top four LEDs are flashing one by one as shown. Release the power button
when your menu choice is lit.
Accuracy Channel
Accuracy- Press the power button momentarily to select Fine or Coarse accuracy setting. After 5 seconds of inactivity,
the remote display will exit menu mode and the setting will be saved as default.
Accuracy
Communication Channel- Press the power button momentarily to select channel 1 or 2. After 5 seconds of inactivity,
the remote display will exit menu mode and the setting will be saved as default.
Channel
This is useful on a jobsite where multiple receivers are being used. This allows each to work independently.
Note: Change the channel setting on the remote display first. Then change it on the receiver.
Note: Accuracy and Channel setting will be saved to memory, but LEDs will always default to on.
Receiver LEDs- Press the power button momentarily to select Receiver LEDs ON or OFF. On is solid, Off is flashing.
After 5 seconds of inactivity, the remote display will be saved until the unit is turned off.
Receiver
LEDs
This would usually be done to conserve battery life in the receiver.
Yellow
Fine
Yellow
Green
Red
Red
Receiver Plumb
LEDs off Indicator
off
Fine Coarse
Channel 1 Channel 2
LEDs OFF
LEDs ON
Channel Channel 1
Yellow
Channel 2
Yellow
Green
Red
Red
Yellow
Yellow
Green
Red
Red
5