Master-Slave Function - VentilClima LIGHT 600x600 Manual De Installación, Uso Y Mantenimiento

Cassette de agua
Tabla de contenido
FRA

MASTER-SLAVE FUNCTION

The master-slave function is only possi-
ble if MODbus supervision is not provi-
ded on the system because the connec-
tion used on the print circuit board is
the same as for the MODbus communi-
cation.
The master-slave function is done with
connections and settings of the dip
switches on the print circuit board
One master and up to 59 slaves.
The information that is transferred from
the master board to the slave boards
are:
• ON / OFF
• Operating mode (heating-cooling-fan
only)
• Fan speed (max-med-min-auto)
• Room temperature setting (set-point)
NOTE
1) The window contact function is not
transferred from the master board to
the slave boards
2) The information is transferred from
the master board to the slave boards at
each:
- Remote control or wall interface com-
mand.
- Cut off the power supply.
3) The slave boards can be managed
locally with the infrared remote control,
but in any case resume the commands
from the master board at each:
- Command given to the master board
by remote control or wall interface
- Cut off the power supply.
4) The commands given to each indivi-
dual slave board do not pass to the ma-
ster board and neither to the other slave
boards.
DEU
MASTER-SLAVE FUNCTION
The master-slave function is only possi-
ble if MODbus supervision is not provi-
ded on the system because the connec-
tion used on the print circuit board is
the same as for the MODbus communi-
cation.
The master-slave function is done with
connections and settings of the dip
switches on the print circuit board
One master and up to 59 slaves.
The information that is transferred from
the master board to the slave boards
are:
• ON / OFF
• Operating mode (heating-cooling-fan
only)
• Fan speed (max-med-min-auto)
• Room temperature setting (set-point)
NOTE
1) The window contact function is not
transferred from the master board to
the slave boards
2) The information is transferred from
the master board to the slave boards at
each:
- Remote control or wall interface com-
mand.
- Cut off the power supply.
3) The slave boards can be managed
locally with the infrared remote control,
but in any case resume the commands
from the master board at each:
- Command given to the master board
by remote control or wall interface
- Cut off the power supply.
4) The commands given to each indivi-
dual slave board do not pass to the ma-
ster board and neither to the other slave
boards.
ESP
MASTER-SLAVE FUNCTION
The master-slave function is only possi-
ble if MODbus supervision is not provi-
ded on the system because the connec-
tion used on the print circuit board is
the same as for the MODbus communi-
cation.
The master-slave function is done with
connections and settings of the dip
switches on the print circuit board
One master and up to 59 slaves.
The information that is transferred from
the master board to the slave boards
are:
• ON / OFF
• Operating mode (heating-cooling-fan
only)
• Fan speed (max-med-min-auto)
• Room temperature setting (set-point)
NOTE
1) The window contact function is not
transferred from the master board to
the slave boards
2) The information is transferred from
the master board to the slave boards at
each:
- Remote control or wall interface com-
mand.
- Cut off the power supply.
3) The slave boards can be managed
locally with the infrared remote control,
but in any case resume the commands
from the master board at each:
- Command given to the master board
by remote control or wall interface
- Cut off the power supply.
4) The commands given to each indivi-
dual slave board do not pass to the ma-
ster board and neither to the other slave
boards.
РУС
MASTER-SLAVE FUNCTION
The master-slave function is only possi-
ble if MODbus supervision is not provi-
ded on the system because the connec-
tion used on the print circuit board is
the same as for the MODbus communi-
cation.
The master-slave function is done with
connections and settings of the dip
switches on the print circuit board
One master and up to 59 slaves.
The information that is transferred from
the master board to the slave boards
are:
• ON / OFF
• Operating mode (heating-cooling-fan
only)
• Fan speed (max-med-min-auto)
• Room temperature setting (set-point)
NOTE
1) The window contact function is not
transferred from the master board to
the slave boards
2) The information is transferred from
the master board to the slave boards at
each:
- Remote control or wall interface com-
mand.
- Cut off the power supply.
3) The slave boards can be managed
locally with the infrared remote control,
but in any case resume the commands
from the master board at each:
- Command given to the master board
by remote control or wall interface
- Cut off the power supply.
4) The commands given to each indivi-
dual slave board do not pass to the ma-
ster board and neither to the other slave
boards.
53
Tabla de contenido
loading

Este manual también es adecuado para:

Light 900x900

Tabla de contenido