Idiomas disponibles
Idiomas disponibles
Subscribe and pre-programm the alarm numbers
The "ProgrammerApp" can be used to simply and quickly
register the device with a base station and pre-programm the
alarm number(s). Simply connect the
PC using the USB cable.
EN
With the "ProgrammerApp" (for Windows 7/8/10), which can
be obtained from www.disty.de, you can pre-programm the
telephone numbers on the device and register
NEO
with your DECT phone. The "ProgrammerApp" is also
used to deregister the device or reset individual parameters.
All configuration options can be found in the user guide for
the "ProgrammerApp", which you can download as a PDF
together with the installation file.
If no PC is available at hand, you can also register the
device and pre-programm the alarm number(s) by phone
(see chapter "Tips & tricks", from page 31)
distyNotruf
is now operational.
NEO
24
distyNotruf
NEO
to a
distyNotruf
Operating instructions
Mode of operation
Make a direct call
distyNotruf
Press the alarm button.
first of the pre-programmed telephone numbers. The red LED
flashes and shows that the connection is being established.
Contact chain/alarm confirmation
The acceptance of the direct call
must be confirmed by the receiver
(acknowledged) by them pressing
the "#" button on their telephone after
answering the incoming phone call.
The person being called will receive a
message requesting them to confirm.
This spoken phrase is available in several
languages. If the emergency call is not confirmed
distyNotruf
within 20 seconds,
calls the second number and, if this is not accepted, the next
pre-programmed number. This is repeated until personal
contact to a trusted person has been established.
Operating instructions
is now calling the
NEO
#
This key must be pressed
by the receiver of your call in
order to accept the direct call.
(This ensures that an answering
machine does not accept the
call). Please inform your
trusted contacts!
automatically
NEO
25
EN
Capítulos
Solución de problemas
