Rehaforum MEDICAL Actimo Basic Manual De Instrucciones página 6

Safety instructions
1. Make sure the rollator is fully open and the seat is properly engaged before you use it.
2. Do not fall on the rollator seat!
3. Make sure that the handles are on the same level and test the stability of the rollator before
carefully loading it with your entire weight.
4. Test the brakes before every use. If the parking brakes are activated, the wheels must not rotate,
otherwise the brakes / parking brakes must be adjusted again.
5. Activate the parking brakes by slightly pressing the brake levers and check the fixed position of
the rollator before you sit on the rollator seat! Do not sit down unless the rollator is on a firm,
even ground.
6. Replace visibly damaged or worn wheels by contacting your dealer.
7. A rollator is not a wheelchair, but only a walking aid. Do not slide when you sit on the rollator
seat.
8. Maximum user weight: 130 kg.
Use of brakes and parking brakes
1. Always use both brakes/parking brakes at the same time.
2. To decelerate or stop the walker for a short time, use the brakes by pulling
the brake levers up / down simultaneously until you reach the desired speed
a
Cleaning
Clean the Actimo Basic regularly with a mild detergent and clear water. Use a soft cloth to dry. Do not
use abrasive or corrosive cleaning agents. To disinfect the rollator, use a commercially available
disinfectant. Do not use a high-pressure or steam cleaner for cleaning!
Clean the wheels if they are soiled with a soft brush or cloth using a mild detergent and then dry them
with a cloth.
Multiple use
The Actimo Basic is designed for daily use. The product can be used by several persons. Before the
rollator is used by another person or passed into the possession of another person, it must be
thoroughly cleaned and disinfected in order to prevent the transmission of germs (contamination). This
b
or have stopped.
3. To lock the parking brakes,
press the brake levers downwards at
the same time - under no circumstances
with force or strong pressure - until they
engage.
4. To release the parking brakes,
pull the brake levers upwards at the
same time until they are released
from the
5. The braking effect can be adjusted directly on the
brake lever (A) or on the Bowden cable (B).
lock.