Idiomas disponibles
Idiomas disponibles
Welcome to use SG20-00029 infrared motion sensor!
The product adopts good sensitivity detector and integrated circuit. It gathers automatism, convenience, safety,
saving-energy and practical functions. It utilizes the infrared energy from human as control-signal source and it can start
the load at once when one enters detection field. It can identify day and night automatically. It is easy to install and used
SPECIFICATION:
Power Source: 220-240 V/CA
Power Frequency: 50/60 Hz
Ambient Light: <3-2000LUX (adjustable)
Time Delay: Min.10sec±3sec / Max.15min±2min
Rated Load: Máx. 2000 W
Detection Range: 360°
FUNCTION:
- Can identify day and night: The consumer can adjust working state in different ambient light. It can work in the
daytime and at night when it is adjusted on the "sun" position (max). It can work in the ambient light less than 3LUX
when it is adjusted on the "3" position (min). As for the adjustment pattern, please refer to the testing pattern.
- Time-Delay is added continually: When it receives the second induction signals within the first induction, it will
restart to time from the moment.
Good sensitivity
INSTALLATION ADVICE:
As the detector responds to changes in temperature, avoid the
following situations:
- Avoid pointing the detector towards objects with highly reflective
surfaces, such as mirrors etc.
- Avoid mounting the detector near heat sources, such as heating
vents, air conditioning units, light etc.
- Avoid pointing the detector towards objects that may move in the wind, such as curtains, tall plants etc.
CONNECTION:
Warning. Danger of death through electric shock!
•
Must be installed by professional electrician.
•
Disconnect power source.
•
Cover or shied any adjacent live components.
•
Ensure device cannot be switched on.
Check power supply is disconnected.
•
- Please move the upper cover with anti-clockwise whirl as per the diagram on the right.
- Connect the power and the load according to the connection-wire diagram.
- Fix the bottom on the selected position with the inflated screw.
- Install back the upper cover on the sensor, then you could switch on the power and test
INSTRUCTION
Infrared Motion Sensor
1000 W
Detection Distance: 6m max(<24 ºC)
Working Temperature: -20~+40 ºC
Working Humidity: <93%RH
Power Consumption: approx 0.5W
Installation Height: 2.2-4m
Detection Moving Speed: 0.6-1.5m/s
Poor sensitivity
