NOTE: Attach strap at bottom of barrel before
filling barrel with water. (See Figure 29)
Figure 29
Loop
Strap
Barrel
3. To connect the strap to eye bolt in bottom of barrel,
pull looped strap through the eye bolt. Take the
other end of strap and pull it all the way through the
loop. Pull long end tight to secure strap to eye bolt.
(See Figure 30)
Figure 30
4. Pull strap through cover slit. (See Figure 31)
Figure 31
PAGE 7 OF 24
ASSEMBLY CONTINUED
5. Connect the opposite end
of the strap to the fitting
at the top of the pole, not
around the tent frame
poles. This forms a strong
triangle. (See Figure 32)
6. Fill barrel with water.
7. After barrel is full, tighten ratchet straps by pulling
all slack through ratchet reel, holding strap with one
hand while cranking ratchet handle with the other.
8. Roll excess ratchet straps
and secure into the ratchet
buckle. (See Figure 33)
NOTE: Keep ratchet buckle handle facing up
at all times.
Completed Assembly
Figure 32
Figure 33
with Barrels
0721 IH-9236