Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1. Loose the key (G). Put the workpiece in the
clamp. Point the position operation and press
the key to the workpiece. Turn the key with
the clamp to hold the workpiece.
Warning: the workpiece must be in the center
of the blade disc, otherwise loose the
hexagonal bolts (I) with the hexagonal key to
move the clamp (H) to adjust. Tight the two
hexagonal bolts after adjust.
2. Turn on the angle grinder. Down the
handle (A) and cut the workpiece with the
angle grinder.
3. Warning: always starts the cut with slight
force and cut with smooth force.
4. Cut angle: the cut angle can be adjusted
from 0° to 45°, loose the two hexagonal bolts
(I) with the hexagonal key and adjust to your
desired angle, tight the two hexagonal bolts
after adjust.
33
3 Months of Warranty
The provider warranties this product simultaneously to the current legal warranty
by the period of 3 years as of the date of purchase in accord with the warranty
conditions.
The provider compromises within the due time of the warranty to replace at free
cost, any part that, for manufacturing defects has caused at his opinion, failures
in the product covered by this policy.
The 3 months period shall not be renewed or prorogated, within this warranty.
Operation
34
Tabla de contenido
