Technoline WS 6440 Manual Del Usuario página 19

TO DISPLAY AIR PRESSURE READOUT
Press and hold
again to revert back to calendar display.
TO READ MAXIMUM-MINUMUM IN-OUT TEMPERATURES AND HUMIDITIES
Simply press the
"MAX" icons appearing on the display. Press again to view the minimum indoor-outdoor temperatures and
humidities and the air pressure with "MIN" icons appearing on the display.
When the maximums or minimums are displayed, press and hold the
start to record the maximums and minimums again.
IF YOU LOSE THE OUTDOOR TEMPERATURE AND HUMIDITY
When the outdoor temperature and humidity digits show '---", the wireless transmission is either interrupted or
lost. Press and hold the  / CHANNEL button to start searching for the signal from the outdoor transmitter
with the flashing.
If you continue to lose the outdoor temperature and humidity display, which could happen in extreme cold
weather, try placing the transmitter in a different location until you have smooth transmission of temperature /
humidity data.
HOW TO SYNCHRONIZE YOUR WEATHER STATION WITH ANOTHER OUTDOOR
TRANSMITTER
1. Press  / CHANNEL at the back of your weather station,
and humidity.
2. Press and hold  / CHANNEL until the
of another outdoor transmitter at Channel 2.
3. Slide open the battery door of your second transmitter, slide the switch to the middle position marked
with 2, then insert two AAA batteries into the battery compartment by observing the correct +/- polarity.
Replace the battery cover.
4. The outdoor temperature and humidity of your second transmitter will appear on the LCD together with
icon within few seconds. If the data still does not appear, take out and reinstall batteries to your
second transmitter once.
5. To synchronize your weather station with a third outdoor sensor, repeat the same step by choosing
on your weather station and select 3 on your third transmitter.
AUTO SCROLLING THE OUTDOOR TEMPERATURE AND HUMIDITY OF DIFFERENT
TRANSMITTER
Press  / CHANNEL frequently until the
different outdoor transmitter will be displayed for few seconds alternately with
To stop the auto scrolling, press  / CHANNEL once to go back to constant display of the temperature
and humidity of the
LOW BATTERY INDICATION OF YOUR OUTDOOR TRANSMITTER
The icon will appear to indicate the battery level of your outdoor transmitter is getting low. You may
need to replace the batteries of your outdoor transmitter with new ones.
until the calendar display shows the air pressure readout in hPa. Press and hold
to view the maximum indoor-outdoor temperatures and humidities records with
icon flashes. Then the outdoor temperature and humidity of
transmitter, the icon remains static on the display.
icon appears under your outdoor temperature
icon blinks, your weather station is searching for the signal
EN. 8
to reset both records and it will
, , flashing.