Better Homes and Gardens BHW-10032 Manual De Usuario página 25

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Tools required (not included): Phillips screwdriver, stud finder, tape measure, pencil, power drill and 1/8" drill bit.
32. Ask for assistance to position the assembled unit at the desired location against a wall. If necessary,
adjust the pre-attached Floor Levelers at the bottom of Side Frames (B and C) and Support Foot (Q) to
level the unit.
33. Now, follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to
attach the tip-over restraints to the unit and the wall.
NOTE: The tipping restraint hardware included is for wooden stud wall construction. It must be
attached to a wall stud. Depending upon your wall construction, different anchor hardware maybe
required. Please contact your local hardware store for assistance. Young children can be seriously
injured by tipping furniture. You must install the tipping restraint hardware with the unit to prevent the
unit from tipping, causing any accidents or damage. The tipping restraints are intended only as a
deterrent, they are not a substitute for proper adult supervision. The tipping restraints are not earthquake
restraints. If you wish to add the extra security of earthquake restraints, they must be purchased and
installed separately .
34. The console is now ready for use. Be sure to position your Flat Panel TV in the center of the console,
behind the Stop Rail (R).
Assembly Instructions
25
Tabla de contenido
loading

Este manual también es adecuado para:

Bhw-10033

Tabla de contenido