flir T10 Serie Manual De Instrucciones página 16

3 EN-US English
8. Download and install FLIR Tools/Tools+ or FLIR Report Studio on your
2
computer.
9. Start FLIR Tools/Tools+ or FLIR Report Studio.
10. Connect the camera to the computer using the USB cable.
11. Import the images into FLIR Tools/Tools+ or FLIR Report Studio and create
an inspection report.
12. Send the inspection report to your client.
3.8 View from the right
See Figure 2.1 View from the right, page 2.
1. Knob to change the dioptric correction for the viewfinder.
2. Hand strap.
3. Digital zoom button.
4. Save button (push fully down).
Note The infrared camera can be configured to autofocus when you push
the Save button half-way down. To enable the autofocus function of the Save
button, select
press = Autofocus.
3.9 View from the left
See Figure 2.2 View from the left, page 2.
1. Digital camera.
2. Camera lamp.
3. Laser pointer.
4. Infrared lens.
5. Camera lamp.
6. Digital camera.
7. Focusing ring.
8. Programmable button
9. Button to operate the laser pointer.
2. FLIR Tools+ and FLIR Report Studio are licensed software.
3. This item is dependent on the camera model.
4. The laser pointer may not be enabled in all markets.
#T810138; r. AB/47238/47238; mul
(Settings) > Save options & storage > Save button half-
4
.
3
8