Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1
PREFACE
Use of the manual
This manual is intended as a reference work to enable professional, trained,
authorised users to safely operate, service and repair the product shown on
the front of this document. The figures referred to in the text can be found at
the back of the manual.
Pictograms and symbols
The following pictograms and symbols are used in this manual and on the
product.
WARNING
Risk of electric shock.
CAUTION
After switching off the motor, wait for the fan to stop before
removing the filters.
Tips and advice for carrying out the respective work or activity
more easily.
WARNING
Procedures which, if not carried out with the necessary caution,
can result in serious damage to the product or personal injury.
WARNING
Fire hazard! Never use the product for the extraction of
inflammable, glowing or burning particles, substances or
liquids. Never use the product for the extraction and/or
filtration of aggressive vapours (such as hydrochloric acid) or
sharp particles.
Service and maintenance
For information on specific settings and maintenance or repair work falling
outside the scope of this manual, please contact the supplier of the product.
He will always be happy to help you. Ensure that you have the following data
available: product name and serial number.
These data can be found on the identification plate.
2
IDENTIFICATION OF THE PRODUCT
The identification plate (fig. 1) contains the following data: :
A
serial number
B
product name
C
power rating
D
connection voltage and frequency
3
SAFETY
General
The manufacturer accepts no liability for damage or injury resulting from a
failure to strictly adhere to the safety precautions and instructions in this
manual or carelessness during installation, use, maintenance and repair of
the product specified on the cover of this document and any associated
accessories. Additional safety instructions may be required depending on
the specific working conditions or accessories used. Please contact your
supplier immediately if you have noticed a potential danger during use of
the product.
The user of the product is solely responsible at all times for compliance with
the locally applicable safety instructions and regulations. Therefore, follow all
applicable safety precautions and regulations.
User manual
•
Every person working on or with the product must be familiar with the
contents of this manual and must strictly observe the instructions
contained at all times. The company management must instruct the
personnel using the manual and ensure that all instructions and
regulations are observed.
•
Never change the sequence of the operations to be carried out.
•
Keep the manual in the vicinity of the product at all times.
Pictograms and instructions on the product
•
Entrapment hazard
•
Max. load external mains socket 1300W
Users
•
Only trained and authorised persons may use the product. Temporary
workers and persons undergoing training may only use the product
under the supervision and responsibility of qualified users.
•
The device is not intended for use by people (including children) with
a physical, sensory or mental handicap or who lack the necessary
knowledge and experience, unless they are supervised or have been
instructed in the use of the device by a person who is responsible for
their safety.
•
Always supervise children to prevent them from playing with
the device.
Intended use
1
The product is designed exclusively for the extraction and/or filtering of dust
generated by the most common industrial processes. Any use that differs
from or goes beyond the stated intended purpose is considered misuse. The
manufacturer accepts no liability for any resulting damage or injury. The
product conforms to the applicable standards and directives. Only use the
product in perfect technical condition, in accordance with the purpose
described above.
Safety equipment
•
All safety equipment must be correctly installed and may only be
removed for maintenance and repair work by qualified and authorised
service technicians.
•
The product must never be used if the safety equipment is not
complete or not present, or if it is or has been deactivated.
•
The safety equipment must be inspected for proper function at regular
intervals and immediately repaired, if necessary.
Modifications
•
Modification of the air cleaner or any part thereof is not permitted.
1.
"Intended use" as laid down in EN-292-1 is the use for which the technical product is suited as
specified by the manufacturer, inclusive of his directions in the sales brochure. In case of doubt it is
the use which can be deducted from the construction, the modeland the function of the technical
product which is considered normal use. Operating the machine within.
User Manual Dust Free Industrial 8500
7
Tabla de contenido
