Teka HEB 723 BK Manual Del Usuario página 7

Programming the duration and automatic
stop
1 Press the MODE button until the indicator
above the symbol begins to flash.
2 Select the length of cooking time pressing
the "+" or "–" buttons.
3 Subsequently, the indicator that was flash-
ing will remain lit.
4 Press the mode button until the indicator
above the symbol begins to flash.
5 Select the time that cooking should finish
pressing the "+" or "–" buttons.
6 Subsequently, the indicator that was flash-
ing will remain lit.
7 Select a function and cooking temperature.
8 The oven will remain disconnected with the
indicators above the
Your oven is programmed.
9 When the time to begin cooking is reached,
the oven will switch itself on and will con-
tinue cooking during the programmed time.
10 When the programmed finishing time is
reached, the oven will disconnect, an alarm
will sound and the light above the
bol will begin to flash.
11 Press any button to switch off the alarm
and the oven will reconnect.
12 Set the controls to the position
of the oven.
and symbols lit.
sym-
to switch
Caution
Pressing the MODE button the display on the
screen shows any function programmed. It
can be changed by pressing the "+" or "–" but-
tons. On selecting the desired function, the
indicator above the corresponding signal will
light.
In the event of a power cut, all the program-
ming of the electronic clock will be erased.
The correct time has to be reset and the
watch reprogrammed.
MODE