Use Of The Oven - Teka HEB 723 BK Manual Del Usuario

HEB 723
Setting the time on the clock
On connecting the oven, you will notice that
12:00 appears on the clock and that a light
begins to flash above the
the "+" and "–" buttons the correct time can
be set on the clock, which is subsequently
stored and the flashing light goes out.
Manual use
After setting the correct time, the oven is
ready for use. Select a temperature and a
cooking function.
To switch off the oven, set the controls to the
position .
Functions of the Electronic Clock Programmer
Warning function: This function generates a
warning tone at a specified time.
Cooking time: This function allows to pro-
gramme the oven to cook for a specified time,
after which it will switch itself off.
End of cooking time: This function allows to
establish the exact hour, after which the oven
will switch itself off.
Duration and automatic stop: This function is
used to control the duration and the time at
which the oven will turn itself off. This function
allows the oven to start and stop automatical-
ly.
Warning function
1 Press the MODE button until the signal
above the symbol begins to flash.
2 Choose the time when you want the alarm
to sound, pressing the "+" or "–" buttons.
3 Subsequently, the light will remain on indi-
cating that the alarm is programmed.
4 At the end of the programmed time, an
alarm will sound and the light will begin to
flash.
5 Press any button to turn off the alarm and
the screen shows the current time again.

Use of the Oven

symbol. Pressing
Programming the cooking time
1 Press the MODE button until the indicator
above the symbol begins to flash.
2 Select the length of time, pressing the "+"
or "–" buttons.
3 Subsequently, the indicator that was flash-
ing will light, indicating that the oven will
switch itself off automatically.
4 The clock will then show the current time.
5 Select a temperature and cooking function.
6 When the set time has elapsed, the oven
will disconnect, an alarm will sound and the
indicator will begin to flash.
7 Press any button to switch off the alarm,
reconnecting the oven.
8 Set the controls in the position
off the oven.
Programming the end of cooking time for the
oven
1 Press the MODE button until the indicator
above the symbol begins to flash.
2 Select the time that cooking is to finish,
pressing the "+" or "–" buttons.
3 Subsequently, the indicator that was flash-
ing is lit, indicating that the oven will switch
itself off automatically.
4 The clock will then show the current time.
5 Select a temperature and a cooking func-
tion.
6 When the programmed time is reached, the
oven will disconnect, an alarm will sound
and the indicator will begin to flash.
7 Press any button to switch off the alarm
and the oven will reconnect.
8 Set the controls to the position
off the oven.
This function may be used even though you
are already cooking in your oven. To do so, fol-
low the instructions given except Nº 5.
to switch
to switch