Sunleaves Predator Lighting King Cobra 6 Instrucciones

About your Predator Lighting King Cobra 6 or 8 Plug N' Play Reflector:
• Dimensions: 42 3/4" x 30" x 9 3/4"
• High-quality enamel-coated steel housing for maximum durability
• Aerodynamic mogul socket mount designed for maximum airflow
• Leviton brand 2000W, 600V pulse rated socket
• 15' cord with industry-standard common plug (compatible with ballasts
featuring the common outlet as seen in figure 1)
• Shatter-resistant tempered glass lens
• High-quality 95% European aluminum insert
Instructions:
1. Due to the large size of the King Cobra reflectors, lamp installation is recommended prior to hanging.
Some lamps may be installed without the lens removal via the flange openings. To remove the glass lens, Pantone 152 PC
loosen the thumbscrews and wingnuts to remove the retainer clips and carefully slide the glass lens out.
2. Install lamp and wipe clean with a soft dry cloth.
Pantone 1795 PC
3. Make sure lamp type and wattage are compatible with ballast.
4. If glass lens was removed for lamp installation, reinsert glass and secure with retainer clips, wingnuts
and thumbscrews.
5. Attach provided hangers to reflector housing. Secure hangers then hang reflector using a chain
or heavy duty Rope Ratchet. Reflector should hang level.
6. Plug cord firmly into common outlet on ballast. Now you're ready to grow!
Make sure light system is unplugged and completely cool before proceeding.
SUNLEAVES Font is Bank Gothic
Predator Lighting King Cobra 6 and 8
Plug N' Play Instructions
Thank you for choosing to grow with Sunleaves
products! Your satisfaction and success are important
to us. For best results, carefully read the following
instructions before using your Predator Lighting King
Cobra 6 or 8 Plug N' Play Reflector.
Time to clean your lamp or lens?
Figure 1
PSKS190/PSKE190 Rev:10262010