Sunleaves Predator Lighting Cobra 6 Instrucciones

About your Predator Lighting Cobra 6 or 8 Plug N' Play Reflector:
• Dimensions: 28 5/8" x 25 1/2" x 12"
• High-quality enamel-coated steel housing for maximum durability
• Aerodynamic mogul socket mount designed for maximum airflow
• Leviton brand 2000W, 600V pulse rated socket
• 15' cord with industry-standard common plug (compatible with ballasts
featuring the common outlet as seen in figure 1)
• Shatter-resistant tempered glass lens
• Exclusive lens-closure latches for superior frame seal
• High-quality 95% European aluminum insert
Instructions:
1. Make sure lens frame is secured to hood with wing latches (diagram above).
2. Attach provided hangers to reflector housing. Secure hangers then hang reflector with a chain,
strong cord, or Sunleaves Flexi Hangers. Reflector should hang level.
3. Loosen the wing latches while holding the lens frame. Allow lens to gently swing open.
Complete lens frame removal is recommended but not necessary.
4. Install lamp and wipe clean with a soft dry cloth.
5. Make sure lamp type and wattage are compatible with ballast.
6. Swing lens frame into closed position and securely tighten wing latches.
7. Plug cord firmly into common outlet on ballast. Now you're ready to grow!
Make sure light system is unplugged and completely cool before proceeding.
Predator Lighting Cobra 6 and 8
wing latch operation
1. 2.
Open
Time to clean your lamp or lens?
Plug N' Play Instructions
Thank you for choosing to grow with Sunleaves
products! Your satisfaction and success are important
to us. For best results, carefully read the following
instructions before using your Predator Lighting Cobra
6 or 8 Plug N' Play Reflector.
3.
Figure 1
Closed
PSCS190/PSCE190
REV10142010