Personal Safety - Famastil F-Power Manual De Instrucciones

Do not expose power tools to rain or
14
wet conditions. Water entering a power
tool will increase the risk of electric
shock.
Do not abuse the cord. Never use the
15
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, solvents, sharpedges or
moving parts. Keep the cable clear of
the tool while at work. Damaged or
entangled cords increase the risk of
electric shock.
When operating a power tool
16
outdoors, use an extension cord
suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk
of electric shock.
DO NOT use 2 core extension cords
17
or reels. On power tools with an earth
path, always use a 3 core extension
cord or reel with the earth core
connected to earth.
When the power tool is to be used
18
outdoors, use only extension cords
intended for outdoor use and so
marked. Always unwind any extension
cords fully to avoid overheating.
When using an extension cord, be sure
19
to use one suited to carry the current
your product will draw. An underside
guage will cause overheating.
Stay alert, watch what you are
01
doing and use common sense when
operating a power tool. Do not use a
power tool while you are tired or under
the influence of drugs, alcohol or
medication. A moment of inattention
while operating power tools may result
in serious personal injury.
Use personal protective equipment.
02
Always wear eye protection. Protective
equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing
20 For extension cords upto 15 metres
use a wire cross section of 1.5mm2.
21
Always replace a damaged extension
cord before using it.
22
If the insulation on the power cable
or extension cable is damaged during
use, disconnect the power supply
immediately and have the damaged
cable replaced. Do not touch the cable
before disconnecting the supply!
Protect your extension cord from
23
excessive heat and damp or wet
locations.
Make sure cord is located so that it
24
will not be stepped on, tripped over,
or otherwise subjected to damage or
stress.
This appliance is not intended for use
25
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
26
If the supply cord is damaged, It must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.

PERSONAL SAFETY

protection used for appropriate
conditions will reduce personal injuries.
03 Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying the
tool.
Carrying power tools with your finger
04
on the switch or energizing power
tools that have the switch on invites
accidents.
21