Extension Cords; Before Use - cecotec HidroBoost 3200 Induction Pro Manual De Instrucciones

Ocultar thumbs Ver también para HidroBoost 3200 Induction Pro:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 7
ENGLISH
with reduced physical, sensory or mental capabilities
or lack of experience and knowledge.

Extension cords:

- The use of an extension cord is not recommended. Use only
extension cords intended for outdoor use. These are identified
by the mark "Acceptable for use with outdoor machines; store
indoors while not in use." Use only extension cords having an
electrical rating equal to or more than the rating of the machine.
Do not use damaged extension cords. Examine extension cord
before using and replace it if damaged. Do not pull from the
cord to disconnect it. Keep the cord away from heat and sharp
edges. Always disconnect the cord from the receptacle before
disconnecting the machine from the extension cord. Make sure
it is connected by means of a cord reel which keeps the socket
at least 60 mm above the ground.
- Use extension cords and cord connectors that are properly
earthed.

3. BEFORE USE

NOTE: Make sure all the product components are included in the package and they are all in
good conditions. In any of the parts are missing or present visible signs of damage, contact
immediately the official Technical Support Service of Cecotec.
WARNING: This unit is to be connected to a cold-water source only.
Connect the high-pressure hose to the pressure washer and then connect the spray gun
to the high-pressure hose.
Connect the metallic lance and the nozzle by pressing the connector.
Make sure the anti-impurities filter is clear of any blockage.
Connect the water hose.
Check that the hoses have no kinks.
Turn on water and check for leaks.
Depress trigger to allow air to be expelled through the pump and high-pressure hose,
lock trigger.
Plug in machine and turn on switch.
22
HIDROBOOST 3200 INDUCTION PRO
Tabla de contenido
loading

Tabla de contenido