Milwaukee 2313-20 Manual Del Operador página 4

Rotating Screen
To rotate the screen for ease of use, grasp the LCD
housing and turn clockwise or counter clockwise.
The screen can be rotated approximately 270°.
Warning
sion, electric shock and property dam-
age, always check the work area before be-
ginning a job. Do not allow cable to contact
electrical, chemical, or moving hazards.
Behind walls: Shut off circuit breakers to the
entire area.
Inside Pipes: Ensure there is no electrical
charge to the pipes before beginning inspec-
tion. Do not allow liquid to flow down cable
and into tool.
Auto use: Turn off the engine and allow to cool
before beginning inspection. Do not allow the
camera or cable to contact oil, gas, or other
corrosive materials.
cauTion
To reduce the risk of damage
to the tool, do not use excessive force or
"kink" the cable. Do not use in areas where
camera and cable will contact corrosive or
oily substances.
Do not use the cable to clear clogs or move
obstructions. This is not a drain cleaner!
Using the Inspection Scope
1. A djust the cable to best fit the opening.
2. After checking the workspace for hazards, insert
the cable and adjust the lighting as necessary.
To reduce the risk of explo-
mainTenance
Warning
always unplug the charger and remove
the battery pack from the charger or tool before
performing any maintenance. Never disassem-
ble the tool, battery pack or charger. Contact
a milWaukee service facility for ALL repairs.
Maintaining Tool
Keep your tool, battery pack and charger in good
repair by adopting a regular maintenance program.
After six months to one year, depending on use,
return the tool, battery pack and charger to a
MILWAUKEE service facility for:
• Lubrication
• Mechanical inspection and cleaning (gears,
spindles, bearings, housing, etc.)
• Electrical inspection (battery pack, charger,
motor)
• Testing to assure proper mechanical and
electrical operation
If the tool does not start or operate at full power
with a fully charged battery pack, clean the contacts
on the battery pack. If the tool still does not work
properly, return the tool, charger and battery pack,
to a MILWAUKEE service facility for repairs.
Warning
personal injury and damage, never im-
merse your tool, battery pack or charger in
liquid or allow a liquid to flow inside them.
Cleaning
Clean dust and debris from charger and tool
vents. Keep tool handles clean, dry and free of oil
or grease. Use only mild soap and a damp cloth
to clean the tool, battery pack and charger since
certain cleaning agents and solvents are harmful to
plastics and other insulated parts. Some of these
include gasoline, turpentine, lacquer thinner, paint
thinner, chlorinated cleaning solvents, ammonia
and household detergents containing ammonia.
Never use flammable or combustible solvents
around tools.
Repairs
For repairs, return the tool, battery pack and char-
ger to the nearest service center listed on the back
cover of this operator's manual.
accessories
Warning
pack before changing or removing ac-
cessories. Only use accessories specifically
recommended for this tool. Others may be
hazardous.
For a complete listing of accessories refer to your
MILWAUKEE Electric Tool catalog or go online
to www.milwaukeetool.com. To obtain a catalog,
contact your local distributor or a service center
listed on the back cover of this operator's manual.
4
To reduce the risk of injury,
To reduce the risk of
Always remove battery