Tool Specification; Part List; Intended Use - IVT PL - 900 Guia De Inicio Rapido

Tool specification

Model
Voltage/Frequency [V~Hz]
Rated power [W]
No-load speed [RPM]
Planing width [mm]
Planing depth [mm]
Rabbeting depth [mm]
Sound pressure [dB(A)]
Sound power [dB(A)]
K
Weight [Kg]
Safety class

Part list

1. On/Off switch
2. Lock-off button
3. Drive belt cover
4. Sole plate
5. V-groove 6. Additional handle with cut-depth set
7. Vacuuming connector piece
8. Parallel guide
9. Wing screw for parallel guide adjustment
10. Parallel guide bracket
11. Wing screw for parallel guide bracket
12. Rabbeting depth guide
13. Wing screw for rabbeting depth adjustment
14. Attachment screw
15. Cutter head
16. Set screw
17. Blade
18. Drum plate
19. Shaft
20. Set plate
21. Blade cover
22. Fixing plate
23. Pattern
24. Locking screw

Intended use

This model of planer is intended for hand-operated planing,
cutting of chamfers and rebating of wood and wood-based
materials.
PL-900
230~50
900
16000
82
3
15
91.2
102.2
3
3.5
II
Safety regulation for the use
General safety rules
The following listed safety instructions should serve you for the
right use of the tool and for the protection of your own safety,
therefore, please read this very carefully.
When passing this tool to a third person, these instructions must
be handed too.
Retain this user manual and all other literature supplied with
your tool for any future reference.
Comply with all the safety information and the warnings on the
tool.
Be familiar with the controls and the proper use of the tool
before attempting to use it and above all, make sure you know
how to stop to use it in case of emergency.
Following these simple instructions will also maintain your tool
in good working order.
• The tool must be assembled correctly before use.
• Only use the tool for its designed purposes.
• On the tool, there may be also decals and further indications
about the safety equipment to use that must be considered.
The prevention of accidents is dependent upon the awareness,
common sense and proper training of everyone involved in the
operation, transport, maintenance and storage of the tool.
• Never leave the tool unattended.
• Never allow children to use the tool. Children should be
supervised to ensure that they do not play with the tool.
• Keep children and pets away. All onlookers should be kept
at a safe distance away from the tool when it is in use.
• The user is responsible for third parties while working with
the tool.
• People who aren't acquainted with the operating
instructions, children, juveniles who have not yet reached the
minimum age for using this tool and people under the influence
of alcohol, drugs or medication are not allowed to use the tool.
Local regulations may restrict the age of the operator.
13
Instruction manual
PL-1200
230~50
1200
15000
110
3.5
16
90.4
101.4
3
4.75
II
EN