Peavey Butcher Manual De Instrucciones página 21

Specifications
Power Amplifier Section:
Rated Power and Load:
100W(rms) into 16, 8 or 4 ohms (selectable impedance)
50W(rms) into 16 or 8 ohms (half-power switch engaged)
Hum and Noise:
Greater than 90 dB below rated power
Power Consumption:
Domestic: 300W, 60 Hz, 120 VAC
Export: 300W, 50/60 Hz, 220-240 VAC
Preamp Section:
The following specs are measured @ 1kHz with the controls preset as follows:
Clean and Crunch Gains @ 5
Punch @ 6th CW position
Low, Mid, and High EQ @ 5
Clean and Crunch Volumes @ 10
Effects Send and Return Levels @ 0dB
Master Volumes @ 10
Power Level @ 100W
Presence @ 0
Clean Channel:
Nominal Input Level (no boost): -6.94 dBV, 450 mV rms
Nominal Input Level (with boost): -20.0 dBV, 100 mV rms
Input Impedance: 1M Ohms.
Crunch Channel:
Nominal Input Level (no boost): -8.40 dBV, 380 mV rms
Nominal Input Level (with boost): -14.0 dBV, 200 mV rms
Input Impedance: 1M Ohms.
Effects Send:
Load Impedance: 1k Ohms or greater
Nominal Output Level: 0 dBV, 1.0 V(rms)
Effects Return:
Impedance: High Z, 1M Ohms
Nominal Input Level: 0 dBV, 1.0 V(rms)
(Switching jack provides Effects Send to Effects Return connection when not used)
Equalization:
Clean and Crunch channels: Low, Mid, and High passive EQ with dedicated voicings.
Presence: High-frequency power amp feedback to the phase inverter.
Remote Footswitch:
Special 5-button unit with LED indicators (included)
Dimensions and Weight:
10.5" (267mm) H x 26.5" (673mm) W x 11.4" (290mm) D
50.8 lbs. (23.0 kg)
21