Tabla de contenido
Idiomas disponibles
Idiomas disponibles
The high temperatures of the heat gun will cause the heat
outlet to turn dark over time. This is normal and will not affect
its performance or life.
Air vents must be kept clean and free of foreign matter.
The most effective method of cleaning the vents is with
compressed air. Do not attempt to clean by inserting pointed
objects through the openings.
m
WARNING!
Avoid using solvents when cleaning plastic
parts. Most plastics are susceptible to damage from various
types of commercial solvents and may be damaged by their
use. Use clean cloths to remove dirt, dust, oil, grease, etc.
Storage
m
WARNING!
The heat outlet of the heat gun will stay
hot for a while after use. Always allow heat gun to cool before
storage. Following this rule will reduce the risk of serious
personal injury or property damage.
• Switch off and remove the battery. Cool down the unit.
Thoroughly clean the housing.
• Store the heat gun, with the battery and charger indoors in a
safe location out of the reach of children.
Disposal
Recycling the tool
• Do not dispose of electrical appliances as unsorted
municipal waste. Use separate collection facilities.
• Contact your local government agency for information
regarding the collection systems available.
• If electrical appliances are disposed of in landfills
or dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging your
health and well-being.
• When replacing old appliances with new ones, the retailer
is legally obligated to take back your old appliance for
disposal at least free of charge.
Recycling + Disposal
The product comes in a package that protects it against
damage during shipping. Keep the package until you are
sure that all parts have been delivered and the product is
functioning properly. Recycle the package afterwards or keep it
for long-term storage.
WEEE symbol. Waste electrical products should not
be disposed of with household waste. Please recycle
where facilities exist. Check with your local authority
or local store for recycling regulations.
Battery Caution + Disposal
Always dispose of your battery pack according to federal,
state, and local regulations. Contact a recycling agency in your
area for recycling locations.
m
CAUTION!
Even discharged battery packs contain
some energy. Before disposing, use electrical tape to cover
the terminals to prevent the battery pack from shorting, which
could cause a fire or explosion.
m
WARNING!
To reduce the risk of injury or explosion,
never burn or incinerate a battery pack even if it is damaged,
dead or completely discharged. When burned, toxic fumes and
materials are emitted into the surrounding atmosphere.
1. Batteries vary according to device. Consult your manual
for specific information.
2. Install only new batteries of the same type in your product
(where applicable).
3. Failure to insert the battery in the correct polarity, as
indicated in the battery compartment or manual, may
shorten the life of the batteries or cause batteries to leak.
4. Do not mix old and new batteries.
5. Do not mix Alkaline, Standard (Carbon-Zinc) or
Rechargeable (Nickel Cadmium, Nickel Metal Hydride, or
Lithium-Ion) batteries.
6. Do not dispose of batteries in fire.
7. Batteries should be recycled or disposed of as per state
and local guidelines.
Service + Support
If your Sun Joe
cordless heat gun needs service or
®
maintenance, please call the Snow Joe
service center at 1-866-SNOWJOE (1-866-766-9563).
Model + Serial Numbers
When contacting the company or reordering parts, you will
need to provide the model and serial numbers of your product.
These are found on the decal affixed to the housing of your
cordless heat gun. Copy these numbers into the space
provided below.
Record the following numbers from the housing or handle of your
new product:
Model #:
2 4 V - H G 1 0 0 - C T
12
+ Sun Joe
®
Serial #:
customer
®
Tabla de contenido
