Starting And Stopping - sunjoe 24V-HG100-CT Manual Del Operador

Operation
m
WARNING!
Do not allow familiarity with this product
to make you careless. Remember that a careless fraction of a
second is sufficient to inflict serious injury.
m
WARNING! Always remove battery pack from the tool
when you are assembling parts, making adjustments, cleaning,
or when not in use. Removing battery pack will prevent
accidental starting that could cause serious personal injury.
m
WARNING!
Always wear eye protection when using the
heat gun. Failure to do so could result in objects being thrown
into your eyes and other possible serious injuries.
m
WARNING!
Do not use any attachments or accessories
not recommended by the manufacturer of this product. The
use of attachments or accessories not recommended can
result in serious personal injury.
Intended Applications
This heat gun is intended for the purposes listed below:
• Soften paint, caulking and putty for easier removal.
• Soften adhesives to help remove stickers, floor tiles,
wallpaper, etc.
• Shrink tubing for electrical work.
• Shrink plastic film for wrapping or weatherproofing.
Any usage other than the applications listed above may
cause personal injury and property damage, and will void the
warranty.
m
DANGER!
DO NOT use under wet conditions or in
presence of flammable liquids or gases. DO NOT let children
come into contact with the tool. Supervision is required when
inexperienced operators use this tool.
TOOL ONLY
BATTERY + CHARGER SOLD SEPARATELY
In order to operate this cordless heat gun you will need an
iON+ 24V System battery and charger. See page 13 for
battery and charger options and specifications, or for more
information visit sunjoe.com.

Starting and Stopping

1. Insert the battery in the battery compartment. Push to
make sure it is locked in place (Fig. 4).
Fig. 4
Battery compartment
Battery pack
2. To turn the heat gun on, depress the safety lock button.
While the safety lock button is pressed, press the trigger
switch (Fig. 5).
Fig. 5
Trigger switch
NOTE: The safety lock button reduces the possibility of
accidental starting. It can be depressed from either the left
or right side.
3. When the heat gun is on, release the safety lock button
first, and release the trigger switch. The heat gun is
equipped with hand-free operation function and it's not
necessary to keep pressing the trigger switch to use the
gun.
NOTE: When the heat gun is just started, it's normal that
smoke is produced from the heat outlet.
4. To turn the heat gun off, press the safety lock button
again.
10
Safety lock
button