Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation
Step 3: Mark Door with Template
• Start at 36" (914 mm) from the floor, then fold and apply the template and mark the center of
door edge.
• Select a 2-3/8" (60 mm) or 2-3/4" (70 mm) backset as desired and mark the center of hole on
the door face.
NOTICE
The backset on the door face must be the same as the backset of your lock.
Step 4: Drill Holes
• Drill the holes as marked.
NOTICE
Drill a 2 -1/8" (54 mm) hole from both sides of the door to avoid splitting wood.
7
Tabla de contenido
