Care And Maintenance - TaoTronics TT-SK12 Guia Del Usuario

• The speaker will attempt to pair with the last paired device when powered on. If you have previously paired the speaker with a
device, simply turn on your device and the speaker. They will pair automatically without going into pairing mode.
• If a PIN code is required for pairing, please try "0000" or"8888" (4 zeroes or 4 eights).
AUX Mode
Connect any device to the Rock using a 3.5mm AUX cable. Turn on the speaker and play music through AUX mode.
Note:
There will be a beep sound when a cable is inserted / removed.
Troubleshooting
Q: My speaker will not switch on.
A: Please recharge it and make sure it has enough power. Plug the unit into a charger and see if the LED indicator becomes solid red.
Q: Why can't I pair this speaker with other Bluetooth devices?
A: Please check the following:
• Your Bluetooth device supports the Bluetooth Profiles listed in the Specifications section.
• The speaker and your device are next to each other (within 3 feet / 1 meter).
• The speaker is in pairing mode with the Bluetooth indicator flashing red and blue alternately.
• Reboot your Bluetooth device or the speaker.
Q: After connecting and pairing my Bluetooth device, I cannot hear any music from the speaker.
A: Please check the following:
• Your sound system is connected to the speaker.
• The music volume is at an audible level on both your Bluetooth device and speaker.
• Your Bluetooth device is playing music.

Care and Maintenance

• Keep the speaker away from heat and humidity. Do not put the product under direct sunlight or hot areas. High temperatures will
shorten the lifespan of the speaker, battery, and / or the internal circuit board.
• Do not try to take the product apart. It may cause serious damage.
• Do not drop or knock your speaker on hard surfaces as it may damage the interior circuitry.
• Do not use chemicals or detergents to clean the product.
• Do not scrape the surface with sharp objects.
07/08